Categories
Concept Information

Building a Healthy House

healthy-home-for-the-familyBuilding a home is not just about the form and building materials, but also a design that supports healthy living.

One of the qualities that are very important in building a house is the house should be healthy! Outside of the pursuit of quality of health of interest or application materials you have the latest products on a house. This is the most basic question that must be met.

A healthy home is a home design that supports the health of its inhabitants. The house is quite open, flexible, and easily maintained. The material used is free from harmful chemicals. Children and parents can access easily and safely to various places in the house.

Of course there are still a number of other requirements. Some are practically presented here, and can be a point in the planning of your home.

Natural lighting

Natural lighting coming from the sun. Light will illuminate and give warmth previously dark corners. Thus preventing damp room. Sunlight can kill 80% bacteria and germs that could potentially grow.

Plug the opening of doors, windows, bouvelicht, or vent. The percentage of openings in the ideal home is 10% -20% of floor space.

The location of openings should be adjusted to the room in need of natural light. Also, sync with the direction of the beam so that he can enter through openings that we make.

Air Circulation

Smooth circulation of air makes the air inside the house cooler and healthier. Easy exchange of air, oxygen and carbon dioxide levels balanced. Keep the ceiling is not too low. Hot air under the roof will be easy on the body, if the ceiling is too low. Minimum ceiling height is 3m from the floor. That way, the temperatures at the top is not easy on the body.

You can also request made under the cavity or hole in the roof. Height ranges from 10cm-20cm in length which can be adjusted to the size of the roof beams. This will make the air cavity under the hot roof, easily exchanged with a new air cooler.

Water Supply

At least, every one occupant requires 60 liters of clean water per day. To ensure the provision of water, a house requires a water storage tank (reservoir).

Making water wells must have a sufficient distance from the septic tank hole. Minimal is 3m. If less, it is feared choli bacteria from septic tanks will seep into water wells clean.

Waste Water Channels

A healthy home is also characterized by a good sewer. Waste bias comes from the kitchen, bathroom, service area. Consider the following.

  • Installation of pipe bends should be minimal in order to smooth the flow of waste water flows.
  • The slope of the discharge pipe from the source to roil the city is 70 degrees. Degrees that will make waste water flowing lancer.
  • Use a trap for the goose neck pipe under the sink and the sink so that the insects caught and prevent the musty odor.
  • Replace the bathtub control in the range 4m distance between one another.
  • Channel effluent wastewater from toilets to be made separately and distributed only to the septic tank.

Walls and floor are dry

Moisture may occur in the walls and floors. This will create a room that tends to wet and become a source of breeding of germs.

You can apply the tiles. Ceramics is a type of waterproof material. Floor or wall to be easily dried.

The walls are attached to the wall of a neighbor’s house will generally moist. Between the two walls with water-resistant materials (waterproofing) before it is closed ceramics.

Garbage disposal

Make sure that in making the design of the house there is adequate landfills. Bins should be sufficient to accommodate the amount of garbage daily. There is a cover, and have holes for drainage if the trash was cleaned.

Wells penetrating

Clean water is increasingly difficult to obtain. Meanwhile, we often let the rain water flushing into the city line. You can ask the architect of your home to provide rain water wells in your yard. A minimum by making a biopori hole.

Some things about the above you can discuss with the architect. Once the stage was built there to always care for and maintain the cleanliness of the house. All this will make your stay more calm. Living comfortably with the family for a long time.

Categories
Tips

Create Better Foundations With Rub-R-Wall Water Proofing Solution

The temperatures for carrying this out need to be ideally set and it is for this reason that it is ideal to hire a professional company to carry it out. The membrane is supposed to provide exceptional adhesion. In addition to this, it also has superb inherent strength and is elastic making expansion and contraction easy thus bridging construction gaps by a large margin. This waterproofing solution is used in industrial institutional and commercial applications. It offers numerous benefits as well and some of these are as highlighted below.

1. Unlike other waterproofing solutions, it is not susceptible to breakage at a later date and this is because it is one hundred percent asphalt free.

2. It is non-carcinogenic and non-toxic. For this reason, it does not leach any chemicals into the ground water or ground. It is this aspect that makes it an environment friendly choice.

3. The membrane is designed to resist algae, fungus and bacteria attack. This ensures that the superior performance of the property is well maintained and the property is not exposed to gases and chemicals occurring in the soil.

4. The solution also comes with a lifetime guarantee and meets the building code. It is the best waterproofing solution and guaranteed to prevent water passage under static pressure.

The use of this waterproof solution is diverse. It can be used in foundation walls, ramps, tunnels, plazas, pedestrian concourses and bridge decks among others. In order to ensure you get the most out of waterproofing solution, it is advisable to weigh your options carefully. You can also get the services of a company able to carry out repair of existent foundations that have water leak problems. This will ensure that the appropriate moisture barriers are set up and eliminate the damages brought about by water leaking. Rub-R-Wall water proofing solution should not be overlooked because it offers all these benefits and more.

Choosing the best waterproof material also involves taking into consideration the appropriate method of application. Some waterproof materials require special types of application which you may not be familiar with. The initial applications may require you to apply various coats of waterproof materials. However, if you are doing an annual waterproof application then you may be required to do a partial or comprehensive reapplication. When you are doing initial application, you should consider using products that are ideal for different waterproof materials.

Waterproof treatment is ideal for brick, wooden, and concrete surfaces. You can save a considerable amount of time and buck by choosing waterproof material that can be used on

various surfaces of your building. The length of the surface you wish to waterproof is critical as it determines the amount of money you use purchasing your waterproof material. It is also important to consider the safety of your waterproof material. You should not buy materials that expose you and your pets to serious health risks. The bottom line is to choose waterproof material that goes on with fewer amounts of coating.

Thompson Exterminating can be hired for pest control in South Carolina and free termite inspections.For more Information log on:- water proofing solution South Carolina

 

Categories
Concept Information

Making Wood Kitchen More Functional

Wood-KitchenCooking is the main activity in the kitchen. But it was not only processed foods are biased in the kitchen. New story, new inspiration, even exciting interaction with family members and relatives can be done in the kitchen.

How do these activities become more pronounced? Attention to detail the function of the kitchen is the answer.

In general, the kitchen is divided into four areas. Area, the area stores (storage), cooking, washing, and preparing food. But in the era of the all compact, the kitchen is required to accommodate the volume of activity and a lot of goods. Then came the kitchen products that support these demands. Among them is an integrated storage system with kitchen cabinets, cabinet systems open and close an increasingly varied, and technology of wood materials that are biased to maximize detail the character of wood materials.

More easily processed wood materials. Samarinda camphor wood, teak wood, or composite material of wood shaped, can be combined with storage systems, so as to create spaces that are more compact and maximize storage volume. First, the spaces in areas of difficult angles utilized. But now it becomes easier because there is a special cabinet shelf for corner area.

Similarly, the durability of wood. More options to improve the durability of this wood. From the use of anti-termite technology, advanced drying system, until the processed material, can be done. Processed composite material kitchen supporters are getting lighter. It certainly lighten the load of wood structure. Wood is not easy to warpage due to stress. Age kitchen can be more durable.

Supporting Materials Wood Furniture

Function is directly related to kitchen equipment and furniture. But remember, the design becomes important when the device was in the match with solid wood kitchen cabinets. So what can be done?

  • Make sure the purpose of the cabinet, so you get a picture of the size of the device and the necessary furniture. For example, certain cabinet design is intended as containers plate, then make sure the size of the cabinet according to the size of the device’s built-in plate rack on the market.
  • Plan the use of tools and kitchen furniture brand since its inception. Do a survey on the market to know the needs of furniture that fits in your kitchen. Ask for a brochure that shows the product specifications and size. It is important to align the device and furnishings with our kitchen design.
  • Kitchen devices require treatment. Make sure the kitchen design that makes it easy to care activities. Use a design that makes it easy to remove and install such devices in the kitchen material, without causing damage, such as peeling or damaged wood is too hard mounting bolts.

“tips for you”

  • Choose materials that have been in dry wood. Use anti-termite. Dry wood can reduce the weight of wood and not easily deformed.
  • When you choose to use wood resale of doors, frames, furniture or preparations that have good quality wood (teak, merbau, or camphor), choose the parts that are not exposed to pressure due to compression force of the structure. This is to prevent the hard wood is processed and formed.
  • Wood requires care, especially the often exposed to water. Layering of wood with a waterproof material should be done at the beginning of creation, so the dryness of wood is maintained.